MJS Model 7-layer Corrugated Paperboard Production Line

Product Detail

Introduction

Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line.

Common Design Chart



Equipments List

Equipments Name	MJS-80-1800 Economic	MJS-120-1800 Middle-speed	MJS-180-1800 High-speed
Mechanical Roll Stand (include the paper roll rail.)	5unit	7units
Hydraulic Roll Stand (include the paper roll rail.)			7units
Pre-heater ?600mm	6units
Pre-heater?900mm		6units
Pre-heater?1000mm			6units
Vacuum Single Facer (Roll?280), gimbal drive	3units
Vacuum Single Facer (Roll?320), gimbal drive		3units
Vacuum Single Facer (Roll?380), gimbal drive			3units
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.)	1set
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.)		1set	1set
Four preheater ?600mm	1units
Four preheater ?900mm		1units
Four preheater ?1000mm			1units
Triple Gluer - B	1units	1units
Heavy model triple gluer -C			1units
Double baker (600mm X14heat plates, 6meter cooling part.)	1units
Double baker (600mm X15heat plates, 7meter cooling part.)		1units
Double baker (600mm X18heat plates, 9meter cooling part.)			1units
High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.)	1units	1units
NC Thin Blade (Computer control)			1units
NC Cutter (Servo, straight knife.)	1units	1units
NC Cutter (Servo, spiral knife.)			1units
Paperboard Conveyor (right-angle shape)	1units
Stacker		1units	1units
Glue System		1set	1set
Steam System (Not include boiler and pipes)	1set	1set	1set

Technological Parameters

Technological Parameters	MJS-80-1800 Standard	MJS-120-1800 Middle-speed	MJS-180-1800 High-speed
Line size L*W*H(m)	56×4.5×4.2	67×4.5×4.2	82×4.5×4.5
Factory size L*W*H(m)	60×11×5	72×11×5	88×11×6
Total Power (about)	100kw	180kw	250 kw
Steam Cost	0.8~1.2Mpa (Advise 2t/h boiler)	0.8~1.2Mpa (Advise 4t/h boiler)	0.8~1.2Mpa (Advise 4t/h boiler)
Starch Cost (g/m2)	20-26	20-26	20-26
Raw paper width (mm)	1800	1800	1800
Mechanical Speed	80m/min	120 m/min	180m/min
Economical speed	60m/min	90m/min	150 m/min
Shift capacity (*104m/8h)	3	4.5	9
Transversely cutting precision	±1	±1	±1
Transversely cutting scope (mm)	500-9999	500-9999	500-9999
Slitting scope (mm)	145-1800	160-1800	160-1800
Slitting precision (mm)	±1	±1	±1
Workers	8-11	8-11	8-11

Note: Above parameters are for your reference. It depends on the different machines you choose.