MJT Model 3-layer Corrugated Paperboard Production Line
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Introduction
Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line.
Common Design Chart
Equipments List
Equipments Name | MJT-60-1600 | MJT-80-1600 | MJT-100-1600 |
Mechanical Roll Stand (include the paper roll rail.) | 2 | 2 | |
Hydraulic Roll Stand (include the paper roll rail.) | 3 | ||
Pre-heater ?400mm (Up) | 1 | 2 | |
Pre-heater ?600mm (Ground) | 2 | ||
Vacuum Single Facer (Roll?280), gimbal drive | 1 | 1 | |
Vacuum Single Facer (Roll?320), gimbal drive | 1 | ||
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | 1 | |
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | ||
Double preheater ?400mm | 1 | 1 | |
Double preheater ?600mm | 1 | ||
Double Gluer - A | 1 | 1 | |
Double Gluer - B | 1 | ||
Double baker (600mm X9heat plates, 4.5meter cooling part.) | 1 | ||
Double baker (600mm X11heat plates, 5meter cooling part.) | 1 | ||
Double baker (600mm X14heat plates, 6meter cooling part.) | 1 | ||
Thin Blade (Simple electrical adjust.) | 1 | ||
High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.) | 1 | 1 | |
Mechanical Cutter | 1 | ||
NC Cutter (Servo, straight knife.) | 1 | 1 | |
Conveyor and Stacker | 1 | ||
Paperboard booking machine | 1 | ||
Glue system | 1 | 1 | 1 |
Steam system (not include the boiler and pipes.) | 1 | 1 | 1 |
TECHNOLOGICAL PARAMETERS
Technological Parameters | MJT-60-1800 | MJT-80-1800 | MJT-100-1800 |
Line size L*W*H(m) | 32×3.6×4.5 | 36×3.6×4.5 | 48×4×4.5 |
Factory size L*W*H(m) | 35×11×4.5 | 40×11×4.5 | 55×11×4.5 |
Steam cost | 0.8~1.2Mpa About 2T/h | 0.8~1.2Mpa About 2T/h | 0.8~1.2Mpa About 2T/h |
Starch Cost (g/m2) | 11-13 | 11-13 | 11-13 |
Raw paper width (mm) | 1600 | 1600 | 1600 |
Mechanical Speed | 60m/min | 80m/min | 100m/min |
Economical speed | 45m/min | 50m/min | 80m/min |
Shift capacity (*104m/8h) | 2.5 | 3 | 5 |
Transversely cutting precision | ±2.5 | ±1 | ±1 |
Transversely cutting scope (mm) | 600-2600 | 500-9999 | 500-9999 |
Slitting scope (mm) | 145-1600 | 145-1600 | 160-1600 |
Slitting precision (mm) | ±1 | ±1 | ±1 |
Workers | 6-9 | 6-9 | 6-9 |
Note: Above parameters are for your reference. It depends on the different machines you choose.
- MJS Model 7-layer Corrugated Paperboard Production Line 15 Pieces / (Min. Order)
- MJF Model 5-layer Corrugated Paperboard Production Line 15 Pieces / (Min. Order)
- RYSR Scrap Remover Machine for corrugated paper board 15 Pieces / (Min. Order)
- RYBL Automatic Partition Assembler Machine 15 Pieces / (Min. Order)
- MJKC-2 High-speed Automatic Clapboard Machine (Partition Slotter) 15 Pieces / (Min. Order)
- ALCKC-1 Paperboard Cutting Pressing Line Slotter Cutting Corner Machine 15 Pieces / (Min. Order)
- RYPW Waste Paper Solution System for corrugated box factory 15 Pieces / (Min. Order)
- MJFDZ Full-Automatic Horizontal Hydraulic Waste Baler Machine 15 Pieces / (Min. Order)
- RYHM-1 A4 Paper Cutting &Packing Production Line 15 Pieces / (Min. Order)
- MJSD-2 Corrugated Paper board Cutter Machine 15 Pieces / (Min. Order)
- MJSD-1 Corrugated Paper board Cutter Machine 15 Pieces / (Min. Order)
- MJDM-3 Stacker And Conveyor 15 Pieces / (Min. Order)
- MJDM-1 Basket Stacker And Conveyor 15 Pieces / (Min. Order)
- MJNC-4 Double NC Cutter 15 Pieces / (Min. Order)
- MJNC-3 Double NC Cutter 15 Pieces / (Min. Order)
- MJNC-1 NC Cutter (spiral Knife) 15 Pieces / (Min. Order)
- MJBD-2 Thin Blade 15 Pieces / (Min. Order)
- MJSF-268I Single Facer (Inner Vacuum) 15 Pieces / (Min. Order)
- MJSF-320H Single Facer (Cassette Type) 15 Pieces / (Min. Order)
- MJSF-320FX Single Facer (Square Model) 15 Pieces / (Min. Order)
- MJSF-270V Single Facer (Vacuum Suction) 15 Pieces / (Min. Order)
- MJSF-210C Single Facer (Claw Model ) 15 Pieces / (Min. Order)